Oil System

This is the washer that sits in front of spring to the oil filter.  1959-1965 Cloud III & S3 1959-1968 Phantom V 1966-1978 All Models (before VIN 30000)

This washer has a number of applications: Also has be superseded several times through the years 1. It is the washer between the choke U tube and the manifold 2. It is the larger core plug washer...

This is the original style triangle paper gasket. It is fitted to the end of the cylinder head.  Note: 2 Per Car (Sold Each)  RPI offers the plastic style see part number UE75131 / 07V103771. The p

This is the spring for the relief valve to the oil pump. 1959-1965 Cloud II,III & S2,3 1959-1968 Phantom V 1966-1980 All Models 1980-1989 (VIN 01001-30000)

This is the spring for the oil filter element. 1959-1965 Silver Cloud II, III & S2, S3, Continental & Phantom V 1966-1977 Camargue, Corniche, Shadow, T Saloon & Coachbuilt (prior to VIN 26700)

This is the spring for the oil filler cap (UE41960). 1959-1965 Cloud II,III & S2,31959-2000 All Models

This is the cap that the oil filter spring sits in on all cars fitted with RH10003 oil filter. 1955-1965 Cloud I,II,III, S1,2,3, Continental & Phantom V 1965-1977 Corniche, Shadow, T Saloon &...

This a split pin. Several areas of the car. Supersession: K4628Z,UA10031Z,UA10055Z 1955-1965 Cloud I,II,III & S-series (King Pin & Yoke) 1966-1980 Shadow, T Saloon & Shadow, T Coachbuilt (Breather...

This is the spigot washer for the oil filler cap. 1962-1965 Cloud III, S3 & Phantom V 1966-1980 All Models 1980-1998 All Models

This is the sealing washer with the bonded inner seal. This seal is on the bottom of the oil filter canister under the securing bolt on V8 engines with the RH10003 oil filter.  This seal is included...

This is the sealing ring between the base of the oil filter element canister and the head unit. 1959-1965 Cloud II,III & S2,3 1959-1968 Phantom V 1966-1977 Shadow, T Saloon & Coa

The first V8 engine cars were fitted with a scroll in the crankcase and an oil thrower on the rear of the crankshaft as a means of retaining the oil in the sump. Unfortunately, this arrangement was...

Plain washer found on car areas:Oil filler & breather, steering column, throttle body, air/heating servo & choke, throttle housing, rear door ashtray spring, headlamps 1959-1968 Cloud III, S3 &...

This is a plain 5BA Washer fits: Supersession: CS6501Z-K4401Z-K8802Z-WHT004049-X4401Z 1955-1959 Cloud I & S1 - Steering Column/Horn Contact, Gear Quadrant LHD Manual & Power Steering, Inspection...

This washer is found all over the cars from 1955-1997 Front Door Hinge Transmission Gear Change Volute Casing Thermostat

This is the Breather Pipe Assembly 1978-1978 Phantom VI (VIN PGH102-PGH134) With GM400 Transmission  

This is the gear and spindle for the oil pump assembly.  Note: Original part # UE5826 this number has been superseded by 07V115123 1960-1998 Onward ALL V8 ENGINES   

This is an original oil pump driving gear.  Picture shows what looks to be rust. This is NOT rust!  This is cosmoline spray that was put on the part before leaving the Rolls factory. Note: Original...

This is the oil pressure sender for the warning light on switchbox. Bentley superseded this switch to UE44823 (the one used on the early SZ models) but we find this switch to be better calibrated to...

This is the Oil Pressure Gauge Sender for models after 1977. You will need to order part# UD8017 (copper washer) to go along with this sender  1977-1980 (VIN 30001-41686) 1980-1991 (VIN 01001-34109)

This is the oil pick up gasket.  Supersession: UE31837 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1998 Silver Spirit, Silver Spur, Mulsanne, Turbo R, Pre Arnage, Azure

This is the engine oil level sender located in the sump. First fitted to the Shadow II and T2 models as part number UE40714. This sender unit fits all V8 engine models up to year 2002. You will...

This is the gasket between the pedestal for the oil pick-up in the sump and the side of the crankcase for all V8 engine models.  Supersessions:  UE73619, 07V103239, UE5204 1959 onward V8 engine...

This O ring has a number of applications. Original part# was UE31592 this has been superseded by PS110173PA which are a reproduction. 1. It is the O ring that sits into the oil filler neck on the...

This O ring has a number of application. This O ring can be found in the Suspension, Engine, Fuel System, & Steering.  1945-1955 All Models 1955-1965 All Models 1966-1980 All Models

This is the sealing o ring from pick-up pipe UE5833 to engine, with o ring SPC1468 sealing the oil pump. 1966-1980 Corniche, Shadow, T, Shadow II, T-2, Silver Wraith II

The is the sealing o ring fitted on one end of pipe UE5833 from pump, with o ring SPC1469 sealing the other side of pipe to engine. 1966-1980 Corniche, Shadow, T, Shadow II, T-2, Silver Wraith...

This is the sealing ring on each end of the pick-up pipe to the oil pump. There are 2 required per car and sold each.  (see diagram for placement) 1966-1977 Models up to VIN 26705  

This is a .312UNF x 1.125 Long Bolt found in many areas of the car.  Please use diagrams to assure the placement of UA156Z. 1955-1965 Exhaust, Rear Extension, Rear Engine, Brake Pedal Lever,...

This is the hose between the flame trap and the oil filler. 1987-1993 Brooklands, Continental, Corniche, Eight, Mulsanne, Spirit, Spur, Turbo (VIN 20001 to 46781)