Steering

On the S2/S3 & Cloud II/III range this pair of belts drives the crank, coolant & PAS pulleys.(The other set of belts are RH9263)On the early Shadow/ T1 cars with no air conditioning and a dynamo these belts drive the crank, coolant and dynamo...

This is the main pin for the inner steering track rod.  Part Number:  UR15145   Model / Chassis Applicability   1966-1976 Silver Shadow, Corniche, Bentley T        

This is the low pressure return hose that fits onto the outlet pipe on the back of the Saginaw power steering pump (as fitted to all cars from approx 1968).It is also the inlet and outlet hose on the power steering oil cooler from 1987 (VIN 20001)...

Two types of steering rack have been fitted to Rolls-Royce and Bentley motorcars of this era. The internal seals differ slightly, but our steering rack kit includes all the seals required for both types. In fact, it is more comprehensive than any other...

This kit contains the two steering rack gaiters and the four clips that retain them. Please be aware that these are only dust covers. If your gaiters have split and are leaking oil then the steering rack is faulty and needs replacing or overhauling...

This is the high pressure hose steering kit. This is the hose from the power steering pump to the rack on LHD models. This kit comes with the adapter for the rear of the pump and two O-rings. PART NUMBER:  RH2818 MODEL /...

This is the top lid seal for the Hobourn Eaton power steering pump. Part Number: CD628 Model / Chassis Applicability   1956-1965 Silver Cloud & S-series 1966-1967 before Vin# 4548  

This is the main rubber coupling for the lower steering column. It can be used on the early columns but you may also need 4 bolts SPC3244, 8 washers WHT002850 and 8 nuts UA302Z.   If you are looking for the early coupling look at...

This is the steering column rubber coupling also known as the coupling universal joint lower steering column. PART NUMBER: UR13767 MODEL / CHASSIS APPLICABILITY   1966-1968 (PRIOR to 4185) Silver Shadow 2-door...

This is the O'ring at the Hobourn Eaton steering pump front housing. PART NUMBER: CD5223 MODEL / CHASSIS APPLICABILITY   1966-1972  (Before VIN 11215)   

This o ring has a number of applications:1. It is the smaller inner o ring for the rear shackle pin in the MkVI and R Type range (2 per spring)2. It is the o ring on the engine breather system of later Series 2 and all Series 3 S Types and Silver Clouds3...

This is the boot that fits around the Detroit coupling of the lower column coupling just above the steering box. Part Number:  UR16527 Model / Chassis Applicability   1966-1975 (Vin 1001-26708)  

This is a full seal kit for overhauling the Saginaw PAS pump. It includes the following seals: CD5011, CD5012, CD4552 x2, CD5010 and a magnet which acts as a filter. Note: If you are not sure what type of pump you have, call our sales office and we can...

This is the power steering pump lid seal kit PART NUMBER: CD6083 MODEL / CHASSIS APPLICABILITY   1955-1965 Silver Cloud & S-series & Continental & PV’s  

This is the filter that sits in the reservoir of the Hobourn Eaton power steering pumps. Part Number: CD633 / CS-PSF Model / Chassis Applicability   1956-1965 Silver Cloud I, II, III & Bentley S1, S2, S3, PV Early...