Carburetors

This is the main spring inside the carburetor suction chamber.  PART NUMBER: CD5871 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998  Silver...

This is the spring for the main carburetors needle. Part Number: CD5453  Model / Chassis Applicability   From 1969 (vin# 8742) to 1986 (Vin# 17000)  

This is a Shadow II carburetor gasket RH13183 together with a new fixing bolt SPC1867, two dowels SPC1862 and aluminum washer WHT002850.It has been designed for all pre-Silver Shadow II models with a V8 engine. We have become aware that, after...

This is the o ring for the float chamber lid on all later Shadow and T Series 1 models - from VIN 8742 to 26708. It seals the charcoal filter into the float chamber lid. Note:  1 required per float chamber (Sold Each) PART...

This is the main carburetor jet for the S3 and Silver Cloud III models and the early Silver Shadow and Bentley T models. 1960-1965 (Bentley S2/3 & Rolls-Royce Silver Cloud II/III only) 1966-1970 (1001-8742)

This is the main carburetor needle for UK SPEC cars.   PART NUMBER:  UE41503   MODEL / CHASSIS APPLICABILITY               1977-1980 From (VIN 30,001...

This is the main carburetor needle for UK spec cars from, VIN 1001 to 5603. *This is the only thing NOT included in the carb kit X-CK2 1966-1968 Only Vin#1001-5603

This is the inlet manifold to carburetor gasket. 1977-1980 (VIN 30001 onward) 1980-1986 (VIN 1001-17000)

This is the gland seal on the throttle spindle.  Note: 2 Seals per Spindle = 4 per car (Sold Each) 1969-1980  From (Vin 8742 onwards) 1981 to 1986 (Vin 17000)

This is the thick gasket and spacer assembly that goes between the induction T piece and the carburetor. Part Number:  RH13076 Model / Chassis Applicability   1977-1980 From (VIN 30,001 onwards)1981-1986 up to (VIN...

This is the float chamber needle and seat kit for all cars with SU carburetors from 1966 to 1984. 1966-1984 ALL WITH SU CARBURETORS 1966-1980 (VIN 1001-41686) 1980-1998 (VIN 1001-17000) Note: 2 kits are required per car.  Sold...

This is the float chamber seal.  Part Number: CD5936 Model / Chassis Applicability                        From 1977 models (VIN 30001) to 1987 models (VIN...

This is the spring and filter assembly in the top of the carburetor float lid. 1955-1965 Silver Cloud I,II,III & S-series, Phantom V 1966-1968 Shadow & Bentley T (up to VIN 8741)

This is a new float chamber cover.  Also need CD5936 with each lid. 1966-1987 fitted with HIF7 SU Carburetors

This is the Fiber Washer that sits on the to of the Carburetor Float Chamber. 1946-1955  Silver Wraith, Mk-6, R-type, Sliver Dawn  1956-1965 Silver Cloud & S-series & Continental & PV’s 1966-1980  Silver Shadow,...

This is a carburetor damper assembly.  This is the damper for the main carburetor spring pot. 1963-1976  (From VIN 1001 to 26700)

This is a USED main bimetal choke spring.  Also known as the coil thermostat. This photo is for reference only and the part you receive might be slightly different. Please check with our sales staff if you have any questions Part...

This is the gasket between the back of the choke spring housing and the main butterfly assembly. 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II  

This is the gasket between the carburetor and the intake manifold 1959-1965 Silver Cloud II, III & Bentley S-2,3, Phantom V, Continental's 1965-1980 Shadow, Shadow, T-series, Corniche up to (vin# 26708)

This is the gasket between the 2" carburetors and the inlet manifold. Note: 2 Per Car (Sold Each)  1955-1965 Silver Cloud, S-series, Continental & Phantom V with 2" carbs 1966-1980 Silver Shadow, Silver Spur & Bentley T (UP to...

This is a kit containing all parts required to service one carburetor. The only component missing is the main needle part# (CD6080) this sold separately. 1966-1968 VIN 1001-6000 ONLY Note:  2 kits required per car (Sold Separately)

This is the carburetor kit needed when servicing the carburetor (2 kits required) per car.  You will also need the Main Carburetor Needle (UE36062) & the Diaphragm Spring (UE8408)  1968-1978  Silver Shadow, T-series, Shadow II, T-2,...

This is the carburetor gasket for cars with an EGR system. Part Number:  RH13075 Model / Chassis Applicability   1966-1980 Silver Shadow I,II,III, T-series, Silver Wraith II  

This is the main carburetor jet needle BAE.  Part Number:  UE36062   Model / Chassis Applicability   1970-1980 (VIN 8741 to 22116) Not Corniche and Not USA (VIN 14954 onwards)  

This is a carburetor jet kit for all cars with an HIF7 carburetor. 1977-1980 (VIN 30001-41686) 1980-1986 (VIN 1001-17000)

These are the small charcoal filters that sit in the inlet to the float chambers.   Note: 2 required per car, sold separately (Sold Each)  1969-1987  From SY VIN 8742 to SZ VIN19670 

This is the gasket for the carburetor float lid. All models from 1945 to 1976

This is a float kit for all cars with SU carburetors. 1977-1980 (VIN 30001-41686) 1980-1986 (VIN 1001-17000) Note: 2 Kits per car (Sold Separately)

Carburetor Float measures (1.5") includes Gasket  This is the float chamber float for all cars from 1963 to 1977. It is 1.5" in diameter because RR started to fit a smaller diameter float to the Series 3 Silver Cloud and Bentley S Types to...

This is the Aluminum Sealing Washer that sits on top of the Carburetor Float Chamber. All models up to 1986