Rear Calipers (Early cars with a Master Cylinder)

This is the Right Rear Brake Caliper.   PART NUMBER: RH2578 MODEL / CHASSIS APPLICABILITY   1966-1975  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II (1001-22117)   

This is the flexible rubber brake hose for the right hand rear caliper.  this one runs along the rear trailing arm and is the inner (shorter) hose of the two.  The outer hose is CD6248.  These two hoses have been known to swell and block...

This is a complete set of seals to reseal both rear calipers.  Only takes 1 per car / per axle. If you need the later kit see part number (X-CRL,CD5847) for years '75 onward. If you are splitting the calipers in half then, you will need to order...

This is the flexible rubber brake hose for the left hand rear caliper.  this one runs along the rear trailing arm and is the outer (longer) hose of the two.  The inner hose is CD6243.  These two hoses have been known to swell and block...

This is the Left Rear Brake Caliper Assembly.  PART NUMBER: RH2577 MODEL / CHASSIS APPLICABILITY   1966-1975  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II  (VIN 1001-22117)  

This is the caliper gallery seal, which is needed if you plan on breaking apart the actual caliper when rebuilding.  This seal fits in between the two halves.  Early front calipers (for non-vented / solid brake discs) have one gallery seal...

This is the dust cover for the bleeder screw.   These will go to bleed screw part no. UR10967 **Sold Each Part Number: UG2427 Model / Chassis Applicability   ALL MODELS          ...

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow/ T Type rear calipers and accumulator valve bodies. Early Silver Shadow models with solid front brake discs were originally fitted with the longer...