Engine

This is the gasket to the water pump housing. Part Number:  RH12795 / CS-8WPG Model / Chassis Applicability   Rolls-Royce Silver Cloud II,III & Bentley S-2,3  

This is the gasket for the water pump adapter on the last of the R Type cars and all of the S1 and Silver Cloud I models. Part Number: RH12792 Model / Chassis Applicability   1954-1955 R-type1956-1959 Silver Cloud I and S-1...

This is the round, 4 hole gasket for the water gallery covers on the right hand side of the crankcase. Note:  There are 3 gaskets per engine (Sold Each) Part Number: RH12898 Model / Chassis Applicability   1956-1959...

This washer has a number of applications: 1. It is the washer between the choke U tube and the manifold 2. It is the larger core plug washer for the front of a V8 cylinder head PART NUMBER: WHT002910 MODEL / CHASSIS...

This is the spark plug washer and there is one per plug. PART NUMBER: CD151 MODEL / CHASSIS APPLICABILITY   All Rolls-Royce and Bentley Models from 1956-1998 year models              ...

This is the washer for the crankcase / cylinder head. PART NUMBER: UE5708  MODEL / CHASSIS APPLICABILITY   1960-1965 Silver Cloud II,III and Bentley S2,3 PV models 1966-1980  Silver Shadow, T-series, Shadow...

This is the washer for the front core plug on the left hand & right hand side of the engine block.The rear plug washer on the left side is XB1095R and on the right side is XB1078R. PART NUMBER: XB1193R MODEL /...

This washer has a number of applications, one of which is for the one shot pump.  * There are 4 required washers per engine (sold separately)  PART NUMBER: RF3274 MODEL / CHASSIS APPLICABILITY   1946-1955 RR...

This is the washer for the banjo bolt on the inlet manifold that retains the petrol drain pipe. This washer is also for the banjo bolt adaptor rocker oil feed. Note: 2 required per car (sold separately)  Bentley S1,2,3, Rolls-Royce Silver Cloud...

This washer has a number of applications:1. It is the washer for the inlet and outlet pipes onto the fuel filter and the fuel pump on all Silver Cloud & S Type models2. On the early Silver Cloud I & S1 models it is the washer for the radiator...

This is a plain washer with internal diameter of 0.39". It's original part number was UA1253Z. It has a number of applications including :1. It sits on the end of the flexible brake hoses under the half nut (UA353Z)2. It is the exhaust manifold bolt...

This is a modern rubber valve stem seal that can be fitted to all cars from 1960 onwards as a modification to the original cotton valve stem seal (UE7428). Note: 8 Per Cylinder Head;  16 Required Total Per Car (Sold Each) PART...

These are the original cotton valve stem seals. There are 8 seals per cylinder head.  (16 required per car) PART NUMBER: UE7428 MODEL / CHASSIS APPLICABILITY   1960-1965 Silver Cloud & S-series & Continental...

These are the original cotton valve stem seals fitted to all of the Straight 6 engines.   1945-1955 Silver Wraith, Mk-6, R-type, Silver Dawn Models  1956-1959 Silver Cloud I & Bentley S1 (6 Cylinder models only)

This is the circlip for the valve stems. * There are 6 per engine (sold separately)  PART NUMBER: EB1747 MODEL / CHASSIS APPLICABILITY   1946-1955 RR Silver Dawn & Silver Wraith, Bentley MkVI & R...

This is the main spring for the inlet and exhaust valves on all cars from 1960 (S2 & Cloud II) to 1969 (VIN 8741).  Then the spring is used for the inlet valve only from 1969 (VIN 8742 onward)  PART...

This is the inlet valve guide. (.002 in oversize) PART NUMBER: RE14507 MODEL / CHASSIS APPLICABILITY   1956-1959 Silver Cloud I & Bentley S1 (6 Cylinder models ONLY)  

This is the Grommet that covers the Rocker Stud. Note:  6 per car (sold each)  1959 - 1997 All V8 Models 

This is the rocker cover stud bush grommet for the valve cover, 6 Cylinder.  Note: 3 required per car (Sold Each)  PART NUMBER: EB3998  / SS-GVC MODEL / CHASSIS APPLICABILITY   1945-1955 Silver Wraith,...

This is the Valve Cover Gasket / Rocker Cover Gasket made in cork as the original.  **2 required per car (Sold Separately)

This is the valve collet for all models. They are priced individually per half collet. 1946-1955 Silver Wraith, Mk-6, R-type, Sliver Dawn  1956-1965 Silver Cloud I,II,III, S-series, Continental, Phantom V 1966-1979 Silver Shadow I,II,III,...

This is a GOOD USED engine valley pan cover also known as the lifter pan cover. This photo is for reference only and the part you receive might be slightly different. Please check with our sales staff if you have any questions PART...

This is a factory original new old stock engine valley pan cover also known as the lifter pan cover. Note: This photo was taken with the protective Cosmoline paper that was put on by the factory. PART NUMBER: UE5185 MODEL /...

This is the valley pan gasket also known as the tappet cover gasket. 1960-1965 Silver Cloud II,III & S-2,3, PV's with V8

This is the rear upper gearbox mount rubber. PART NUMBER: UR2723 MODEL / CHASSIS APPLICABILITY   1955-1959  Rolls-Royce Silver Cloud I and Bentley S-1                  ...

This is a pair of drive belts for the fan for the later cars with power assisted steering but no air conditioning or interior cooling. 1956-1959 Rolls-Royce Silver Cloud I & Bentley S1  

This is the triangle paper gasket that can be found on the end of the cylinder head.  If you want the plastic style see part number UE75131 / 07V103771. Note: 2 Per Car (Sold Each) The part number has been superseded several times. Part...

This is the standard top hose for all standard bodies cars. 1956-1965 Silver Cloud I & Bentley S1 * Please be aware that it is slightly shorter than the current OE hose but does include the pre-formed bend in the hose.

This is the timing cover gasket. Part Number:     Model / Chassis Applicability   1956-1959 Silver Cloud I & S1 (6 Cylinders Only)        

This is the timing cover gasket.   Part Number: RH12742 Was UE5220 Model / Chassis Applicability   1959-1965 (Bentley S2/3 & Rolls-Royce Silver Cloud II/III only) 1966-1980 (1001-41686)