Front Suspension

This is the wheel stud that will fit right front or right rear wheels on all cars before mid 1971.   1966-middle of 1971 (before vin# 11800 approximately)     

This is the wheel stud that will fit left  front or left rear wheels on all cars before mid 1971. 1966-middle of 1971 (before vin# 11800 approximately)   

This is the gasket for the valve seat to body for the front suspension damper. PART NUMBER: UR5418 MODEL / CHASSIS APPLICABILITY   1959-1968 Rolls-Royce Phantom V   

This upper bearing pin is for the early Series 1 cars with non-compliant front suspension that have four pins and bushes which mount the upper lever (wishbone) arms to the front sub-frame. 1966-1972 (VIN 1001-13484)

This is the front suspension upper ball joint.  (sold each) PART NUMBER: UR73257 MODEL / CHASSIS APPLICABILITY   1966-1980 (VIN 1001-41686) 1980-1998 (From VIN 1001 onwards)          ...

 This is an excellent used top plate for the front spring. This is the steel top plate and supersedes the aluminum style they are visually different, so we would advise that you order two and replace both. This photo is for reference only and...

This is the front suspension kit for the upper ball joint.  PART NUMBER: UR73257KIT MODEL / CHASSIS APPLICABILITY   1965-80 (VIN 1001-41686) Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-98...

These are the D rubbers that mounts the AR bar to the front of the front sub frame. Note: 2 Per Car (Sold Each) Part Number:  UR15520 Model / Chassis Applicability   1966-1980 Silver Shadow I,II,III, T-series, Silver...

This is the steering track rod end, right hand socket. Part Number:  UR13936 Model / Chassis Applicability   1966-1980  CORNICHE Bentley Corniche 2-door Saloon (CBH10420 - CBH10985) Bentley Corniche...

This is the small chamber bush is pressed into the elbow of the top wishbone arm. 1972-1980 (From Vin 13485-41686)1981-1998 (From Vin 1001 onwards)

This a USED shock tower cover in "aluminum" not pressed steel.  These are hard to find in good re-usable condition and are not available any longer. You may also need UR72172 gasket for the cover.   This photo is for reference only and...

This is the Stepped shock damper rubber.  Part Number: UR71798 Model / Chassis Applicability   1971-1980 (VIN 11466-41686) 1980-1995 (VIN 1001-54084)  

This is the ball joint fitted to the bottom of the front dampers. PART NUMBER: UR73258 MODEL / CHASSIS APPLICABILITY   1966-80 (VIN 1001-41686) Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-98...

This is a plastic cap for the front shock suspension. This original part number was SPC1293 but has been superseded to SPC3734. 1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1998 Silver Spirit, Sliver Spur, Mulsanne,...

These are the Metalastic washers for the front suspension bearing pins. (UR13211, UR10489 and UR10490) 1966-1980 Rolls-Royce Silver Shadow I, II & Bentley T1, T2 1980-1982 Silver Spirit, Silver Spur, Mulsanne, Turbo R

The camber bush is pressed into the top wishbone arm on all compliant front suspension cars where the arm mounts to the subframe. Note:  2 per car  (Sold Each)  PART NUMBER: UR71238 MODEL / CHASSIS...

This is the lower triangle lever front suspension rear left hand. Part Number:  UR12877 Model / Chassis Applicability   1970-1980 Shadow, Shadow II, Corniche, Camargue  

This is the Inner Tie Rod End Kit 1966-1976 Rolls-Royce Silver Shadow I & Bentley T1 & Corniche 

This is the grease retainer for the right hand front hub with Shadow/T with solid front brake discs.  Part Number:  UG12172 Model / Chassis Applicability   1966-1974  Solid Front Brake Discs  

Oil seal for front hub on all models from 1973 onward.  We recommend these seals are replaced when replacing the front brake discs or the front wheel bearings. Note: Requires 2 Seals per hub (Sold Each) Part...

This is one of the four main subframe mounts that sit in the corners of the subframe.  Part Number:  UR13829   Model / Chassis Applicability   1966-1972 (VIN 1001-13484)  

This is the seat that the front road spring sits in. Originally these were canvas but they are now plastic. They stop the metal spring from grinding against the metal spring support.On the MkVI, R type and Silver Dawn models there is a seat above and...

Front shock kit (Bilstein) give a much better ride than the original (Boge) shock damper.  They are recommended by Harvey Bailey Engineering to be fitted alongside their handling packages. This kit includes the top mounting rubbers and a new sleeve...

This is the lower rear bearing pin that fits between the rear of the lower wishbone arm and the back of the front subframe. There are two per car and as they are located below the bell housing so they tend to suffer from oil ingress. 1966-1980 ...

This is the outer front wheel bearing (cup and cone). PART NUMBER: UG13544/5 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998 Sliver Spirit, Sliver...

This is the lower front bearing pin that fits between the front of the lower wishbone arm and the front of the front subframe. Note: 2 Per Car (Sold Each) 1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II  (Vin#...

This is the inner front wheel bearing (cup and cone). PART NUMBER: UG13552/3 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998 Sliver Spirit, Sliver...

This is the front damper/ shock ball joint housing. This part screws into the base of the damper and the ball joint then screws into this housing. Part Number:  UR14734 Model / Chassis Applicability   1966-1980 (VIN...

This is the plain shock damper rubber.  There is one on the top of each Front shock / damper and there is one on the top and bottom of the rear shock / damper on All Shadow and T-series (1971-1980) Note:  Each Sold...

This is the sleeve that sits around the center of the front shock absorber body. The spring support UR12899 sits onto this sleeve.  Part Number:  UR12902 Model / Chassis Applicability   1966-1980 Silver Shadow,...