Head Lamp and Tail Lamp Seals

This is the seal between the tail lamp casing and the body of the car.  Sold in pairs Part Number: RB3568 / 6-82 Model / Chassis Applicability   1947-1952 Early Type for Short Boot (trunk fold...

These are the seals that sit between the casing that holds the rear lamp and the rear wing on the R Type. **Sold as a pair Part Number: RD6706  / 6-83 Model / Chassis Applicability   1952-1955 Later type Long Boot...

Tail lamp gaskets.  These are the seals between chrome bezel and base, furnished as a pair. Part Number:  RD7066 Model / Chassis Applicability   1946-1952 Short boot Mk-6, Dawn        ...

This is the seal between the headlamp reflector and the chrome rim. It measures 8.5" OD, 7" ID and is 1/8" thick. PART NUMBER: AE710 MODEL / CHASSIS APPLICABILITY   1946-1954  Mk-6 and R-type Models ...

 This is the license frame mounting rubber for corner croft assembly that has the round lights.  PART NUMBER: 6-80 / RD5299 MODEL / CHASSIS APPLICABILITY   1946-1955  Silver Wraith, Mk-6, R-type, Sliver...

This is the Park lamp to body gasket.  Furnished in a pair. * Replacement Parts Part # is 6-60G. This also can be found under part #RD4587SEAL Part Number:  6-60G Model / Chassis Applicability   1947-1955...

This is the seal between headlamp bucket and body.  Two series of headlamps were furnished.  Series 1 (up to about 1952) seal has 8 holes; Series 2 (1952 up) has 11 holes.  These are furnished in a pair.  Part...

This is the Seal between headlamp bucket and body.  Two series of headlamps were furnished.  Series 1 (up to about 1952) seal has 8 holes; Series 2 (1952 up) has 11 holes.  These are furnished in a pair.  Part...