Rear Brakes

This is the domed rubber cover for the shake-back stops on the front and rear brake back plates. 1955-1965 Rolls-Royce Silver Cloud I,II,III & Bentley S-1,2,3, PV's, Continental's

This spring has a number of applications:1. It is the spring between the rear brake equalizing rod (UG870 & UG872) and the rear brake back plate/ water excluder on all Silver Cloud and Bentley S Type models.2. This spring is also used on the...

This is the spring for the shake back stop for the front and rear brake shoe. PART NUMBER: UG2032 MODEL / CHASSIS APPLICABILITY   1956-1965 RR Silver Cloud I, II, III & Bentley S1, S2, S3    ...

This is the small rubber bush for the gear linkage and brake linkage on all models from 1945-1965  Note:  Please use the diagrams to determine where this bush is located on your car PART NUMBER: RG5085 MODEL / CHASSIS...

This is the seal that sits between the rear brake cover and the and back plate. Note: 1 seal per wheel (Sold Each) PART NUMBER: UG2301 MODEL / CHASSIS APPLICABILITY   1956-1965 Silver Cloud, S-series, Continental &...

This is a Rear Wheel Cylinder Piston.  Part Number: CB-RWP23 or UG3689 Model / Chassis Applicability   1960-1965 Rolls-Royce Silver Cloud II, III & Bentley S2, S3, Phantom V  

This is a Rear Wheel Cylinder Kit.  1 Kit does 1 wheel Note: 2 required per car (Sold Each) 1960-1965  Bentley S2 & 3 1960-1965 Rolls-Royce Silver Cloud II, III, Phantom V    

This is a kit of rubber seals and also includes the spreader for one rear wheel cylinder (UG2747) for the S1 and Silver Cloud I Note: Takes 2 per car (Sold Each) 1956-1959 Rolls-Royce Silver Cloud I, & Bentley S-1

This is the Rear wheel cylinder assembly and there is 1 per wheel.  (Sold each)  Will fit right or left rear. 1960-1965 Rolls-Royce Silver Cloud II, III & Bentley S2, S3  

This is a new rear wheel cylinder.  Note:  2 required per car (Sold Each) 1956-1959 Rolls-Royce Silver Cloud I Bentley S-1   

This is the rubber boot that covers the end of the rod as it attaches to the rear wheel cylinder. Also called the drawlink boot. There is one boot per side, Sold Each. Part Number:  UG1174 Model / Chassis...

This is the rear brake shoe pull off spring (UG1154) and link lever (UG1155) 1955-1965 Silver Cloud & S-series & Continental & PV’s  

This is a set of 4 New brake shoes and new linings. 1956-1965 Rolls-Royce Silver Cloud I, II, III & Bentley S1, S2, S3 & Phantom V  

This is a New brake shoe and new lining.  This is  1 shoe and 1 lining.  If you would like to order a set of 4 Please see item# CB-RS for the set of 4 Part Number: RH12860 Model / Chassis...

This is the Rear Brake Hose there is only 1 required per car.  You usually need to add 1 of UR1200 washer as well.  1955-1965 Rolls-Royce Silver Cloud I,II,III & Bentley S-1,2,3, Phantom V  

Rear Adjusting Screw for the Back-plate / Steady Post rear brake back-plate  PART NUMBER: UG3409 MODEL / CHASSIS APPLICABILITY   1956-1965 Silver Cloud I,II,III, S-series, Continental & Phantom...

This is the Oilite bush. This bush is found in many areas on the car.  Note: See diagrams to help find the placement for this Oilite Bush. 1956-1965 Silver Cloud, S-series, Continental & Phantom V  1966-1980  Silver Shadow,...

This O'ring has a number of application. This O'ring can be found in the Suspension, Engine, Fuel System, & Steering.  PART NUMBER: CK610 MODEL / CHASSIS APPLICABILITY   1945-1955 Silver Wraith, Mk-6,...

This is the collar for the shake-back stops on the front and rear brake back plates. PART NUMBER: UG3658 MODEL / CHASSIS APPLICABILITY   1956-1965 Silver Cloud I,II,III & Bentley S-series  1959-1968 Phantom...

This is the brake shoe adjustment screw for the front and rear brakes. 1955-1965 Silver Cloud I,II,III & S-series 1,2,3, PV's, Continental's

This is the rear brake expander for the rear only Part Number: UG2726 Model / Chassis Applicability   1955-1959 Silver Cloud I & Bentley S-1   

These are the screws that retain the brake drums.  They are very prone to rusting and can be very difficult to remove. Note: 3 Screw per drum (Sold Each) 1956-1965 Silver Cloud I,II,III, S-series, Continental, Phantom V  

This is a Brake Drum for Front or Rear.  They are the same for all Silver Cloud and S-series Models. 1956-1965 Silver Cloud I,II,III & S-1,2,3 series & Phantom V

This is the dust cover for the bleeder screw.   These will go to bleed screw part no. UR10967 Note: Sold Each Part Number: UG2427 Model / Chassis Applicability   ALL MODELS        ...

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow/ T Type rear calipers and accumulator valve bodies. Early Silver Shadow models with solid front brake discs were originally fitted with the longer...