Other

Washer for the water pump coupling 1922-1929 20HP 1926-1936 20/25HP 1936-1938 25/30HP 1938-1939 Wraith 1925-1929 PI 1929-1935 PII 1934-1936 3 1/2 1936-1940 4 1/2

This is the Inlet and Exhaust Valve spring, tapered 1906-1925 Silver Ghost 40/50HP SERIES H TO U    

Inlet valve guide, each 1936-1938 25/30HP   

This is a Tappet Spring for 1922 to 1926 20HP models.  1922-1929 20HP      

This is the Tail Pipe Extension for 20/25 HP models. Please note:  You may receive one that is still covered with factory tape.

This is the rear cover gasket for the water pump drive    1922-1929 20HP   1926-1936 20/25HP   1936-1938 25/30HP  

This is the Radiator Shutter Return Spring  Pre 1946   

This is a Radiator Cap Washer for 1926 to 1936 20/25HP.  1926-1936 20/25HP      

NEW and MINT ROLLS ROYCE RADIATOR CAP This radiator cap came from a London Pre-war Rolls Royce Factory Distributor. The bottom inside diameter is 1-15/16". Height 7/8". The chrome on this cap is beautiful. Part Number: E55812 Model...

Steam Filler Cap Plug 1936-1939 Phantom III

This is a piston ring set .020  consist of (6 R5476 and 6 EB3091)  1936-1939 Phantom 31934-1936 3 1/2

This is a factory Rolls-Royce original tail pipe extension.  Part Number: E88608 Model / Chassis Applicability   Phantom III      

Water Pump Packing Glad, Each 1929-1935 Phantom II

This is an oil cap for 1926 to 1936 20/25 HP. 1926-1936 20/25 HP     

Macot Retaining Nut 1929-1935 Phantom II 1936-1939 Phantom III

Round Head key Blank, not original.  Part Number: RH7492 Model / Chassis Applicability   Pre 1955 Models, R-type, Silver Dawn, Silver Wriath  

This is a Thermostat Gasket / Joint Washer Pre 1955

This is an Inlet Valve  1926-1936 20/25HP 1936-1938 25/30HP

This is the water pump packing gland.   1922-1929 20HP1926-1936 20/25HP1936-1938 25/30HP     

Check your old fuse wire to see if it has deteriorated or been overloaded. We recommend you carry some as spare. Yes, it is important to use the correct wire!  Part Number:   Model / Chassis Applicability   Pre...

This is a Exhaust Valve Guide for 1926 to 1936 20/25 HP. 1926-1936 20/25HP        

Exhaust Valve 1926-1936 20/25HP (VIN# GLR26 - GBT22) 1936-1938 25/30HP

This is the catle nut that is 1/4 BSF x 0.325 Long, Nut,  Bentley crown wheel, Phantom 2 crank damper out Phantom II

This is the manifold to down pipe bolt.   1926-1936 20/25HP GLR26 - GBT22 1936-1939 P3       

Dowel B/Weights Crankshaft 1926-1936 20/25HP 1936-1938 25/30HP 1934-1936 3 1/21936-1940 4 1/2 1938-1939 Wraith 1946-1955 Dawn 1947-1959 Silver Wraith 

This is the gasket for the Joint, Crankcase Halves on the 1929-1935 Phantom 2

Cable Eye, Terminal  PART NUMBER: RD6957 MODEL / CHASSIS APPLICABILITY   1922-1929 20HP 1926-1936 20/25HP 1936-138 25/30HP 1936-1939 Wraith 1906-1925 Ghost 40/50   

This is the Brass Washer for the Bonnet / Hood  PART NUMBER: RB5847 MODEL / CHASSIS APPLICABILITY   1936-1939 P31946-1955 Silver Dawn, Mk-6, R-type