Other

Washer for the water pump coupling 1922-1929 20HP, 1926-1936 20/25HP, 1936-1938 25/30HP, 1938-1939 Wraith 1925-1929 Phantom I, 1929-1935 Phantom II, 1934-1936 3 1/2, 1936-1940 4 1/2

This is the Inlet and Exhaust Valve spring, tapered 1906-1925 Silver Ghost 40/50HP SERIES H TO U    

Inlet valve guide, each 1936-1938 25/30HP   

This is a Tappet Spring for 1922 to 1926 20HP models.  1922-1929 20HP      

This is the Tail Pipe Extension for 20/25 HP models. Please note:  You may receive one that is still covered with factory tape. This part in No Longer Available

This is the rear cover gasket for the water pump drive   1922-1929 20HP  1926-1936 20/25HP  1936-1938 25/30HP  

This is the Radiator Shutter Return Spring  Pre 1946   

This is a Radiator Cap Washer. 1926-1936 20/25HP      

NEW and MINT ROLLS ROYCE RADIATOR CAP This radiator cap came from a London Pre-war Rolls Royce Factory Distributor. The bottom inside diameter is 1-15/16". Height 7/8". The chrome on this cap is beautiful. 1922-1929 20 HP 1960-1925 Silver Ghost...

Steam Filler Cap Plug 1936-1939 Phantom III

This is a piston ring set .020  consist of (6 R5476 and 6 EB3091)  1936-1939 Phantom 31934-1936 3 1/2

This is a factory Rolls-Royce original tail pipe extension.  Phantom III

Water Pump Packing Glad, Sold Each 1929-1935 Phantom II

This is an oil cap for 1926 to 1936 20/25 HP. 1926-1936 20/25 HP     

Mascot Retaining Nut 1929-1935 Phantom II 1936-1939 Phantom III

This is the key blank for all Pre 1955 year models.  This is an aftermarket brand.   Pre 1955 Models, R-type, Silver Dawn, Silver Wraith  

This is the key blank for all Pre 1955 year models.   Pre 1955 Models, R-type, Silver Dawn, Silver Wraith 

This is a Thermostat Gasket / Joint Washer Pre 1955

This is an Inlet Valve  1926-1936 20/25HP 1936-1938 25/30HP

This is the water pump packing gland.   1922-1929 20HP1926-1936 20/25HP1936-1938 25/30HP     

Fuse Wire. It is important to check you wire for deterioration or if overloaded. We recommend you carry some as spare.  Pre 1945 mostly prewar models 

This is a Exhaust Valve Guide for 1926 to 1936 20/25 HP. 1926-1936 20/25HP        

Exhaust Valve 1926-1936 20/25HP (VIN# GLR26 - GBT22) 1936-1938 25/30HP

This is the castle nut that is 1/4 BSF x 0.325 Long, Nut,  Bentley crown wheel, Phantom 2 crank damper out Phantom II

This is the manifold to down pipe bolt.   1926-1936 20/25HP GLR26 - GBT22 1936-1939 Phantom 3       

Dowel B/Weights Crankshaft 1926-1936 20/25HP, 1936-1938 25/30HP, 1934-1936 3 1/2, 1936-1940 4 1/2, 1938-1939 Wraith 1946-1955 Dawn 1946-1955 Dawn & 1947-1959 Silver Wraith 

This is the gasket for the Joint, Crankcase Halves on the 1929-1935 Phantom 2

Cable Eye, Terminal  1906-1925 Ghost 40/50  1922-1929 20HP 1926-1936 20/25HP 1936-1938 25/30HP 1936-1939 Wraith

This is the Brass Washer for the Bonnet / Hood  1936-1939 Phantom 3 1946-1955 Silver Dawn, Mk-6, R-type