Cars with Solid Front Brake Rotors (Discs)

This is the grease retainer for the right hand front hub with Shadow/T with solid front brake discs.  Part Number:  UG12172 Model / Chassis Applicability   1966-1974  Solid Front Brake Discs  

This is the outer front wheel bearing (cup and cone). PART NUMBER: UG13544/5 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998 Sliver Spirit, Sliver...

This is the inner front wheel bearing (cup and cone). PART NUMBER: UG13552/3 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998 Sliver Spirit, Sliver...

This is a complete set of seals to reseal all four of your front calipers. Only takes 1 per car / per axle.  Part Number: CD5339 / X-CFL Model / Chassis Applicability   1966-1980 Vented Shadow, Shadow II, T-series,...

Flexible Rubber Brake Hose. **4 are required per car (Sold Each) Part Number: CD6242 / X-FBH Model / Chassis Applicability   1965-1980 Rolls-Royce Silver Shadow I, II & Bentley T1, T2, Silver Wraith...

This is the complete front caliper assembly RH Leading for the right hand front wheel and the and LH Trailing caliper for the left hand front wheel.  These are only for non-vented models.  Pre 1973 Part...

This is the complete front caliper assembly LH Leading for the left hand front sheel and the and RH Trailing caliper for the right hand front wheel.  These are only for non-vented models.  Pre 1973 Part...

This is the early non-vented front brake rotor. Sold Each PART NUMBER: UG12114                          MODEL / CHASSIS APPLICABILITY   1966-1973 Non-...

Set of front brake pads, 1 set required per car. This is a set of 8 pads supplied without any fixing pins (CD4075) and clips (CD4076). These are the correct pads for all early Shadows and T Types with solid front brake discs (rotors) Part...

This is the piston for the front brake caliper.   ** 2 required per front caliper (Sold Each) Part Number: CD5844 Model / Chassis Applicability   1966-80 (VIN 1001-41686), 1980-98 (From VIN 1001 onwards) ...

This is the caliper gallery seal, which is needed if you plan on breaking apart the actual caliper when rebuilding.  This seal fits in between the two halves.  Early front calipers (for non-vented / solid brake discs) have one gallery seal...

This is the dust cover for the bleeder screw.   These will go to bleed screw part no. UR10967 **Sold Each Part Number: UG2427 Model / Chassis Applicability   ALL MODELS          ...

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow/ T Type rear calipers and accumulator valve bodies. Early Silver Shadow models with solid front brake discs were originally fitted with the longer...