VIN 20001 to 50000

This is gasket for the water pump to the housing  1966-1980 Shadow, T, Shadow II, Silver Wraith II, Corniche 1981-1998 All Models

This is the short necked threaded flange water pump fitted to cars around 1985 - 1986. On Turbo cars it was fitted from VIN 10069 to 17000. On non-Turbo Cars (VIN 8334 to 17000)  

This is a NEW long necked threaded flange water pump with seal UE9671. It was fitted to a short range of cars around 1984. Turbo cars from VIN 04233 to 8536 and non-Turbo cars from VIN 7413 to...

This is the sponge seal that sits between the water pump volute casing and the front lower crank cover on the front of the engine. Original part # was UE5608 now has been superseded...

This a Good Used plastic cooling fan that is attached to the front of the water pump.  Please note:  This plastic cooling fan does not have the outer holes like the one that fits the later models...

This is the large O ring on the inlet pipe that sits on the left hand side of the water pump volute casing, that sits on the front of the engine. Original part # was CK955, UR3776, these have been...

This is a used viscous coupling is fitted to all Spirit/ Turbo models from 1987 onwards. It also is fit to the 2000 and 2001 Arnage Red Label fitted with the Bentley V8 engine. Note:  This part...

This viscous coupling is fitted to all Spirit/ Turbo models from 1987 onwards. It also is fit to the 2000 and 2001 Arnage Red Label with the Bentley V8 engine. Note:  This part supersedes to part...

This is a Good Used plastic cooling fan that is attached to the front of the water pump.   From VIN 20001 to 27798 This photo is for reference only and the part you receive might be slightly...

This is the Internal 2.062in Circlip for the Nominal Water Pump. 1981-2000 Azure, Brooklands, Continentals, Eight, Mulsanne, Spirit, Spur, Turbo (VIN 2123-66587)

This is the gasket between the volute casing and the bypass tube. 1976 from VIN 30001 Models with Solex Carburetor 1981-1998 Models with a Solex Carburetor, Turbo Charged or Fuel Injected

Bolt .250 UNF x .375" long fits: Air intake filter, Cooling fan (electric), front bumper, crankshaft & main bearings, starter ring gear & torus Please Contact our Sales Department for Diagram...

This is a Rebuilt Water Pump Assembly Impeller (spin on type) with a 2 year guarantee, gasket included. The Core charge does not apply if you send yours in first. Flat charge will be $375 1984 -...