Rear Calipers (Early cars with a Master Cylinder)

This is the Right Rear Brake Caliper assembly. 1966-1975  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II  (VIN 1001-22117) Core will need to be returned for this caliper  When returning core, please insure with the...

This is one of the flexible rubber brake hoses for the right hand rear caliper. It runs along the rear trailing arm and is the outer (longer) hose of the two. The inner hose is CD6247. There are also two of these hoses from the rat-trap (master...

This is the flexible rubber brake hose for the right hand rear caliper.  this one runs along the rear trailing arm and is the inner (shorter) hose of the two.  The outer hose is CD6248.  These two hoses have been known to swell and block...

This is a complete set of seals to reseal both rear calipers.  Only takes 1 per car / per axle. If you need the later kit see part number (X-CRL,CD5847) for years '75 onward. If you are splitting the calipers in half then, you will need to order...

This is the small rear caliper piston for 1966-1998 All Models  On the early Silver Shadow and Bentley T models (up to VIN 22117) each rear caliper had two small pistons and two large pistons (CD6283).On the later Silver Shadows and...

This is the Left Rear Brake Caliper Assembly.  1966-1975  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II  (VIN 1001-22117) Core will need to be returned  When returning core, please insure with the shipper and pack...

This is one of the flexible rubber brake hoses for the left hand rear caliper. It runs along the rear trailing arm and is the inner (shorter) hose of the two. The outer hose is CD6244. These hoses have a tendency to swell and block internally and are...

This is the flexible rubber brake hose for the left hand rear caliper.  This hose runs along the rear trailing arm and is the outer (longer) hose of the two.  The inner hose is CD6243.  These two hoses have been known to swell and block...

This is the large rear caliper piston. There are two pistons per rear early (pre 1975 approx) caliper. Sold as Each 1966-1975 (VIN 1001-22117)  

This is the caliper gallery seal, which is needed if you plan on breaking apart the actual caliper when rebuilding.  This seal fits in between the two halves.  Early front calipers (for non-vented / solid brake discs) have one gallery seal...

This is the dust cover for the bleeder screw.   These are for bleed screw UR10967 Note: Sold Each All Models  

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow, T-series, and Silver Wraith Type rear calipers and accumulator valve bodies. Early Silver Shadow models with solid front brake discs were originally...