Rear Calipers (Early cars with a Master Cylinder)

This is the Right Rear Brake Caliper assembly. 1966-1975  Corniche, Camargue, Shadow, T (VIN 1001-22117) Core will need to be returned for this caliper 

This is one of the flexible rubber brake hoses for the right hand rear caliper. It runs along the rear trailing arm and is the outer (longer) hose of the two. The inner hose is CD6247. There are...

This is the flexible rubber brake hose for the right hand rear caliper.  this one runs along the rear trailing arm and is the inner (shorter) hose of the two.  The outer hose is CD6248.  These two...

This is a complete set of seals to reseal both rear calipers.  Only takes 1 per car / per axle. If you need the later kit see part number (X-CRL,CD5847) for years '75 onward. If you are splitting...

This is the small rear caliper piston for 1966-1998 All Models  On the early Silver Shadow and Bentley T models (up to VIN 22117) each rear caliper had two small pistons and two large pistons...

This is the Left Rear Brake Caliper Assembly.  1966-1975 Camargue, Corniche, Shadow, T (VIN 1001-22117) Core will need to be returned 

This is one of the flexible rubber brake hoses for the left hand rear caliper. It runs along the rear trailing arm and is the inner (shorter) hose of the two. The outer hose is CD6244. These hoses...

This is the flexible rubber brake hose for the left hand rear caliper.  This hose runs along the rear trailing arm and is the outer (longer) hose of the two.  The inner hose is CD6243.  These two...

This is the large rear caliper piston. There are two pistons per rear early (pre 1975 approx) caliper. Sold as Each 1966-1975 (VIN 1001-22117)  

This is the handbrake lever return spring. There is one spring per rear caliper 1966-1980 All Models 1980-1998 All Models

This is the handbrake adjusting rod spring. There is one fitted to each rear caliper. Please note: product may be painted yellow, depending on stock 1

This is the caliper gallery seal, which is needed if you plan on breaking apart the actual caliper when rebuilding.  This seal fits in between the two halves.  Early front calipers (for non-vented...

This is the dust cover for the bleeder screw.   These are for bleed screw UR10967 Note: Sold Each All Models from 1955-2002  

This is the longer of the two bleed screws fitted to the rear brake calipers. Each rear caliper has one long bleed screw and one short bleed screw (UR10967).On early Silver Shadow and Bentley T...

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow, T-series, and Silver Wraith Type rear calipers and accumulator valve bodies. Early Silver...

This is the anti-rattle spring for the real calipers and brake pads. 1966-1980 All Models 1980-1998 All Models