Oil System

This washer has a number of applications: Also has be superseded several times through the years 1. It is the washer between the choke U tube and the manifold 2. It is the larger core plug washer for the front of a V8 cylinder head 3. It is the washer...

This is the original style triangle paper gasket. It is fitted to the end of the cylinder head.  Note: 2 Per Car (Sold Each)  RPI offers the plastic style see part number UE75131 / 07V103771. The part number has been superseded several times...

This is the spring for the oil filter element. 1959-1965 Silver Cloud II, III & S2, S3 1966-1980 Silver Shadow & Bentley T (prior to VIN 30000)

This is the sealing washer with the bonded inner seal. This seal is on the bottom of the oil filter canister under the securing bolt on V8 engines with the RH10003 oil filter.  This seal is included in the oil filter RH10003 when purchased from us...

The first V8 engine cars were fitted with a scroll in the crankcase and an oil thrower on the rear of the crankshaft as a means of retaining the oil in the sump. Unfortunately, this arrangement was usually allowed some level of oil leakage. This was only...

This is the gear and spindle for the oil pump assembly.  Note: Original part # UE5826 this number has been superseded by 07V115123 1960-1998 Onward ALL V8 ENGINES   

This is the oil pressure sender for the warning light on the switchbox for all Silver Shadow I & II and Bentley T1 & T2 models. Bentley superseded this switch to UE44823 (the one used on the early SZ models) but we find this switch to be better...

This is the Oil Pressure Gauge Sender for models after 1977. You will need to order part# UD8017 (copper washer) to go along with this sender  1977-1980 (VIN 30001-41686) 1980-1991 (VIN 1001-34109)  

This is the oil pick up gasket.  Supersession: UE31837 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1998 Silver Spirit, Silver Spur, Mulsanne, Turbo R, Pre Arnage, Azure

This is the engine oil level sender located in the sump. First fitted to the Shadow II and T2 models as part number UE40714. This sender unit fits all V8 engine models up to year 2002. You will also need UE73618 or UE73618NR gasket when replacing this...

This is the gasket between the pedestal for the oil pick-up in the sump and the side of the crankcase for all V8 engine models.  Supersessions:  UE73619, 07V103239, UE5204 1959 onward V8 engine models only  

This O ring has a number of applications. Original part# was UE31592 this has been superseded by PS110173PA which are a reproduction. 1. It is the O ring that sits into the oil filler neck on the end of the breather flame trap housing from (VIN 6001) on...

This O ring has a number of application. This O ring can be found in the Suspension, Engine, Fuel System, & Steering.  1945-1955 Silver Wraith, Mk-6, T-type, Sliver Dawn 1956-1965 Silver Cloud, S-series, Continental, Phantom V 1966-1980...

This is the sealing ring on each end of the pick-up pipe to the oil pump. There are 2 required per car and sold each.  (see diagram for placement) 1966-1977 Models up to VIN 26705  

This is the flame trap in the oil breather pipe. 1970-1980 from VIN 9001 onwards

This is the flame trap for the oil breather pipe on the early Silver Shadow and Bentley T models. 1966-1970 (VIN# 1001 to 8861) 

This is the bolt for mounting the exhaust manifold to the cylinder head. Many supersession: UA159R, UA159Z UA161R, UA161SR, UA161SS, UA161Z, WHT002858 8 Bolts Per Manifold This bolt also can be found throughout the car. Please read carefully...

.125UNF x 1.250 long Bolt has many areas found on the car.  Cloud I & S1 - Exhaust Manifold to Downpipe (3 bolts per manifold); Center, Front Silencer & Tail Pipe Silencer (6 bolts) & 12 bolts needed for Complete Exhaust  Cloud...

This is the Drain Plug Gasket fits all Models fitted with automatic gearbox  1945-1955 Silver Wraith, Mk-6, R-type, Silver Dawn Models (fitted with automatic gearbox) 1955-1965 Silver Cloud & S-series & Continental & Phantom...

This is the O Ring between the breather pipe and the flame trap. 1959-1965 Silver Cloud II,III & S-2,3 & Phantom V 1966-1970 Silver Shadow & T-series Up to VIN 8861  

This is an aluminum washer. It has a number of applications including:1. For the radiator steam escape valve (MKVI)2. Fuel filter outlet union (1945 to 1965)3. Filler plug on front shock absorber (MkVI)4. On the S2 and S3 it is the washer for the smaller...

This is a .312UNF x 1.125 Long Bolt found in many areas of the car.  Please use diagrams to assure the placement of UA156Z. 1955-1965 Exhaust, Rear Extension, Rear Engine, Brake Pedal Lever, Water Pump 1966-1980 Brake Pedal Lever, Oil Pick Up...