Subframe, Subframe Dampers & Tie Bars

This is the lower front bearing pin that fits between the front of the lower wishbone arm and the front of the front subframe. Note: 2 Per Car (Sold Each) 1966-1980 Shadow, T, Shadow II, T-2, Wraith II  (VIN 1001-41686) 1980-1982 Spirit, Spur,...

1. The lower wishbone arms join below the front hubs are held together by two bolts and this is the smaller of the two bolts. It is very common for this bolt to seize and snap when trying to remove the lower steering arm. 1982-1995 Corniche &...

*Front Suspension lever springs & damper used with compliant mount UR72000*Front Suspension upper & lower levers used with compliance mount UR72000 1975-1980 Camargue, Corniche, Shadow, T, T2, Wraith, Shadow II (VIN 22023 onward)1980-1997 All...

The compliant mount is the rubber mount that fits where the top wishbone mounts to the back of the front subframe.  2 required per car (Sold Separately)  1972-1980 VIN 13485-41686 1980-1998 VIN 01001 onward  

Bolt .500 UNF x 2.312in Long fits:* Front & Rear Bumpers* Rear Hubs* Front Subframe Engine Crossmember 1966-1980 All Models 1981-1985 Corniche, Eight, Mulsanne, Spirit, Spur (up to VIN 13643)