VIN 1001 to 20000 Non Turbo Models

This is Aftermarket coolant temperature sender for all cars from 1977 on (VIN 30001).  Note: We also supply the Original part: (UE40361) 1977-1980 (VIN 30001-41686) 1980-1998 (From VIN 1001 onwards)

This is an (original part) coolant temperature sender.    1977-1980 VIN 30001-41686 1980-1998 From VIN 1001 onwards

78°C  This is an original style thermostat with the fail-safe lead pellets around the edge of the thermostat.   You will need the gasket UE73635 when you order the thermostat. 1966-1980 Silver Shadow, T-series, Shadow II, T-2,...

88°C  This is an original style thermostat with the fail-safe lead pellets around the edge of the thermostat.   You will need the gasket UE73635 when you order the thermostat. 1966-1980 All Models 1980-1998 All Models

This is the cork gasket for the otter switch. 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1987 Silver Spirit & Silver Spur

This is the Fan Delay Thermostat controlling the auxiliary/electric cooling fans, located in the thermostat housing. It prevents the auxiliary electric cooling fans operating, and keeps the air conditioning lower quantity flap closed, until the engine...

This is the otter switch for the coolant fan.  It sits on top of the thermostat housing. Shadow II (39734-41601), Wraith II (40458-41648), T2 (40207-41573) Spirit (01001-16930), Spur (01006-16970), Mulsanne (01009-16928)

This is the o ring that seals the ends of the bobbin inlet tube (UE34147 or UE37117) to the thermostat housing from the timing cover and water pump housing. 2 Per Car (Sold Each) 1966-1980 All Models 1980-1986 Silver Spirit, Spur, Mulsanne (up to VIN...

This is the thermostat Gasket 1966-1980 (VIN 1001-41686) 1980-1998 (From VIN 1001 onwards)

This is the gasket between the volute casing and the bypass tube. From 1977 onward from (VIN 31226) Models with Solex Carburetor 1981-98 Models with a Solex Carburetor, Turbo Charged or Fuel Injected

This is a good USED 'S' shaped by pass tube. You will need part# UE9333 which are the O rings on each ends. This photo is for reference only and the part you receive might be slightly different. Please check with our sales staff if you have any...

This is the 'S' shaped by pass tube. You will need 2 of part# UE9333 to make a complete fit 1974 (VIN 18418 to 41686) 1981 to 1986 (up to VIN 16970)

This is a good used by pass elbow that is on top of the water pump volute casing for the S shaped tube UE37117.  You will also need the gasket RH12756 that seals the elbow to the casing.  1974 (VIN# 18418 to 41686) 1981 to 1986  (vin#...

This is the by pass elbow that is on top of the water pump volute casing for the "S" shape tube UE3717.  You will also need the gasket RH12756 that seals the elbow to the casing. 1974 (VIN 18418-41686)1981-1986 (up to VIN 16970)  

This is a Aluminum Washer for the cooling system and oil pick-up.  This washer helps tighten and seal the spaces between the nuts and bolts.   Note: Original part # is XB1092R; superseded to WHT002908 Bentley S1 & Rolls-Royce Silver...