My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
This is the torque arm mount.
They are 2 of these per car mounted above the other on the front of the torque arm. Sold Separately
1966-1980 Silver Shadow I,II,III, T-series, Silver Wraith II
This is the main torque tightened nut for the rear hub assembly. It is fitted to all rear hubs which contain a woodruff key fitting in the stub axle. This nut must be tightened down to between 500...
This is a good used cross-member that carries the differential. Also known or called the rear differential cross member. 1966-1980 Silver Shadow & T-series This photo is for reference...
This is a good used torque arm. 1966-1980 Silver Shadow I,II,III, T-series, Silver Wraith II This photo is for reference only and the part you receive might be slightly different. Please check with...
Easy install. Two per car.
Torque arm mounts are both mounted with the large side down.
There should be two large flat washers in between the mounts with a short spacer.
Secure the upper mount first, then secure the main through bolt before securing the lower mount since it is designed to self center where it mounts to the torque arm.
Could have bought them from those nice folks in England, but the shipping would have been a lot more
