Shock Absorbers and Springs

This is the steel top plate and supersedes the aluminum style they are visually different, so we would advise that you order two and replace both. 1980 through 1995 (VIN 30001-55000) will NOT fit models with active ride control

 This is an excellent used top plate for the front spring. This is the steel top plate and supersedes the aluminum style they are visually different, so we would advise that you order two and replace both. 1980 through 1995 (VIN 30001-55000)...

This is the Stepped shock damper rubber.  1971-1980 (VIN 11466-41686) 1980-1995 (VIN 1001-54084)

This is the gasket for the top spring plate.  Shock tower cover gasket.  1980-1998  Silver Spirit, Silver Spur, Mulsanne, Turbo R Pre Arnage Models      

Front shock kit (Bilstein) give a much better ride than the original (Boge) shock damper.  They are recommended by Harvey Bailey Engineering to be fitted alongside their handling packages. This kit includes the top mounting rubbers and a new...

This is the bolt for mounting the exhaust manifold to the cylinder head. Many supersession: UA159R, UA159Z UA161R, UA161SR, UA161SS, UA161Z, WHT002858 8 Bolts Per Manifold This bolt also can be found throughout the car. Please read carefully...

.125UNF x 1.250 long Bolt has many areas found on the car.  Cloud I & S1 - Exhaust Manifold to Downpipe (3 bolts per manifold); Center, Front Silencer & Tail Pipe Silencer (6 bolts) & 12 bolts needed for Complete Exhaust  Cloud...

This is the plain shock damper rubber.  There is one on the top of each Front shock / damper and there is one on the top and bottom of the rear shock / damper on All Shadow and T-series (1971-1980) Note:  Each Sold...

This 0.012" adjusting washer works with the adjusting distance piece and ball joint on the front shock absorbs. 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1995 Silver Spirit, Sliver Spur, Mulsanne, Turbo R (VIN...