Shock Absorbers and Springs

This is the steel top plate and supersedes the aluminum style they are visually different, so we would advise that you order two and replace both. 1980 through 1995 (VIN 30001-55000) will NOT fit models with active ride control

 This is an excellent used top plate for the front spring. This is the steel top plate and supersedes the aluminum style they are visually different, so we would advise that you order two and replace both. 1980 through 1995 (VIN 30001-55000)...

This a USED shock tower cover in "aluminum" not pressed steel.  These are hard to find in good re-usable condition and are not available any longer. You may also need UR72172 gasket for the cover.   1971-1980 VIN 11500...

This is the Stepped shock damper rubber.  1971-1980 (VIN 11466-41686) 1980-1995 (VIN 01001-54084)

This is a plastic cap for the front shock suspension. This original part number was SPC1293 but has been superseded to SPC3734. 1966-1980 All Models 1981-1998 All Models

This is the lower triangle lever front suspension rear left hand. 1966-1980 Shadow, T, Shadow II, Corniche, Camargue, Wraith II, T2

This is the seat that the front road spring sits in. Originally these were canvas but they are now plastic. They stop the metal spring from grinding against the metal spring support.On the MkVI, R type and Silver Dawn models there is a seat above and...

Front shock kit (Bilstein) give a much better ride than the original (Boge) shock damper.  They are recommended by Harvey Bailey Engineering to be fitted alongside their handling packages. This kit includes the top mounting rubbers and a new...

This is the bolt for mounting the exhaust manifold to the cylinder head. Many supersession: UA159R, UA159Z UA161R, UA161SR, UA161SS, UA161Z, WHT002858 8 Bolts Per Manifold This bolt also can be found throughout the car. Please read carefully...

.125UNF x 1.250 long Bolt has many areas found on the car.  Cloud I & S1 - Exhaust Manifold to Downpipe (3 bolts per manifold); Center, Front Silencer & Tail Pipe Silencer (6 bolts) & 12 bolts needed for Complete Exhaust  Cloud...

This is a .5in shim that controls the adjusting height on the front spring. 1966-1980 Shadow, T, Shadow II, T-2, Silver Wraith II 1981-1990 Spirit, Spur, Mulsanne, Turbo R, Pre Arnage, Azure, Continentals

This is the plain shock damper rubber.  There is one on the top of each front shock / damper and there is one on the top and bottom of the rear shock / damper on All Shadow and T (1971-1980) Note:  Each Sold Separate  1971-1980 (VIN...

This is the sleeve that sits around the center of the front shock absorber body. The spring support UR12899 sits onto this sleeve. Original part# was UR12899. 1966-1980 Camargue, Corniche, Shadow, T, Shadow II, T2, Wraith II

The compliant mount is the rubber mount that fits where the top wishbone mounts to the back of the front subframe.  2 required per car (Sold Separately)  1972-1980 VIN 13485-41686 1980-1998 VIN 01001 onward  

This 0.012" adjusting washer works with the adjusting distance piece and ball joint on the front shock absorbs. 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1995 Silver Spirit, Sliver Spur, Mulsanne, Turbo R (VIN...