This is the brake push rod.  It is 11cm long and it was originally part number UE36794 There were three different lengths of push rod fitted to cars between 1966 and 1980. This is the last type...

This is a fully reconditioned brake pump with a 3/4" (inch) union on the end of the high pressure pipe that fits to the top of the brake pump. All of our reconditioned hydraulic units for cars from...

This is one of the two sealing rings that sit between the brake pump and its housing. There are two O rings per pump and they come as part of the main brake pump seal kit (RH2438). To replace these O...

Brake Pump Feed Pipe o ring.  This is the o ring that seals the brake pump feed pipe to the inlet on the housing of the brake pump. Cars before vin# 6644 will not have this o ring. 1966-1980...

This is the brake pump removal tool. If the inlet and outlet pipes are removed from the brake pump and the top circlip is removed then the housing of the pump can be removed. This tool goes over the...