This is the brake push rod.  It is 11cm long and it was originally part number UE36794

There were three different lengths of push rod fitted to cars between 1966 and 1980. This is the last type fitted. It measures 11cm in length. If you require a push rod and any associated parts please contact us with the VIN of your car and the length of your push rod if you know it. 

From 1980 this was the standard length fitted from 1980-1998.

The earlier Silver Shadow and Bentley T models before VIN 20755 were fitted with a solid brake pump push rod housing and different length push rod. It was found that the solid housing did not allow sufficient lubrication causing the push rod to seize in the housing and the solid push rods were found to be too strong meaning that if they seized they damaged the brake pump. RH3143 is a kit of parts to convert these early models to the later push rod set-up, with a large cut-out in the housing for added lubrication and the later style push rod with a wasted section which will cause the rod to snap should it seize.

1966-1980  Silver Shadow I, II & T-series

1980-1998 (From VIN 1001 onwards)