My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
This is the high pressure pipe from the front brake pump to the accumulator on the left hand side of the engine.
It is suitable for all cars from approx 1973 fitted with the bigger bore pipework and a right hand exhaust manifold with the take-off at the front of the manifold (in the UK this means Silver Shadow I & T1 models)
1966-1976 LHD then 1976-1980 RHD UK models
This is the low pressure return hose from the brake accumulator sphere and valve to the brake reservoir. There are two of these hoses per car on the series 1 models (before VIN 30000). From VIN...
This is a brake accumulator sphere seal kit. Please be aware that specialist tools are required to strip the sphere down and that once it has been rebuilt it will need regassing. This kit includes a...
This is a new Brake Accumulator Sphere. There are two required per car and sold each. This is a recently developed accumulator sphere, that is suitable for both the Series I and Series II...
This is the seal kit to reseal one of the brake accumulator valve bodies for the RR363 systems. 1966-1980 Silver Shadow, T-series, Silver Wraith II, Shadow II, Corniche
This is a fully reconditioned brake pump with a 3/4" (inch) union on the end of the high pressure pipe that fits to the top of the brake pump. All of our reconditioned hydraulic units for cars from...
