Clamps, Olives & Hangers

This washer has a number of applications: Also has be superseded several times through the years 1. It is the washer between the choke U tube and the manifold 2. It is the larger core plug washer...

This washer has a number of applications: 1. It is the washer on the choke stove pipe adapters UA5802Z and UE32833 on all cars from 1955 to 1977.2. It is the sealing washer between the Shadow/ T...

This is a .312UNF x 1.125 Long Bolt found in many areas of the car.  Please use diagrams to assure the placement of UA156Z. 1955-1965 Exhaust, Rear Extension, Rear Engine, Brake Pedal Lever,...

This is the exhaust half clamp.  2 Required to make 1 clamp 1963-1965 Cloud III from (VIN SCX1) & S3 (from VIN B2CN) 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II

This is the exhaust olive for exhaust clamp (RE25307). 1962-1965 Late Bentley S3 (from VIN B2CN) & Rolls-Royce Silver Cloud III (from VIN SCX1) 1966-1980 Silver Shadow, T Saloon & Shadow, T...

This exhaust gasket sits between the front and rear silencer on all Silver Cloud and Bentley S models.It also sits between the front and rear silencers and the intermediate pipes of a late Silver...

This is the olive for (UR5639) the exhaust clamps. 3 required and Sold Each 1963-1965 Cloud III from VIN (SCX1) & S3 from VIN (B2CN) 1966-1980 All Models 1980-1987 Continen

Exhaust manifold to cylinder head stud.  8 required per manifold (Sold Each) 1959-1965 V8 Models Silver Cloud II, III & S-2,3, PV's, Continental's

This is a good used exhaust manifold stud.  These have been cleaned and checked. Note: 8 Per Car (Sold Each)  1959-1965 V8 Silver Cloud II,III and S-2,3, Phantom V

This is the nut for the exhaust manifold stud UE3831. There are 8 nuts per manifold. Please be aware that some cars are fitted with a heatshield above the right hand manifold. These cars have 6 nuts...

This is the exhaust manifold gasket for 8 cylinder models.  Note: There are 4 per manifold: 8 total Per Car (Sold Separately) 1959-1965 Rolls-Royce Silver Cloud II, III, Phantom V & Bentley S-2,3

This is the 4 bolt rubber exhaust hanger. Each hanger accepts 8 EW1332 & E50062 1946-1955 Mk-6, Dawn, Wraith, R-type (Center & Tail Pipe 3 per Car) 1955-1959 S1 (B2AN-B50HA), S1 Continental...

This is the square mounting plate that sits on each side of the rubber hangers. The plate is what the bolts runs through to attach the hanger to exhaust pipes & silencer. You will need 8 of these...

This half clamp is fitted between the front and rear silencers on late S3 & Silver Cloud III models. Also, fits all Silver Shadow & T Type models with a single exhaust system. It accepts the 2.5"...

This is the exhaust gasket that has many applications:   It sits between the manifold and down pipes of all S2 and S3  It sits between the down pipes and front silencer and between the rear...