Exhaust Hangers & Gaskets

This is a plain washer with internal diameter of 0.39". It's original part number was UA1253Z. It has a number of applications including :1. It sits on the end of the flexible brake hoses under the half nut (UA353Z)2. It is the exhaust manifold bolt...

This is the metal distance piece that sits in the bolt hole of the rubber exhaust hanger (RE18216, EB3559 & EB1332) 1946-1954 MkVI & Silver Dawn (Single System) 1955-1962 Cloud I,II & S-1,2 1962 Cloud III (SAZ1-SAZ61) & 1962 S3...

This is the rear silencer to tail pipe gasket. Both UE1683 & UE1145 share the same location. UE1683 can be fitted to all models from 1955-1965 however; UE1145 only fits S1 & Cloud I models. 1945-1955 Silver Wraith with Twin Exhaust...

This is the rubber hanger that attached the exhaust to the chassis. On a MkVI single system there are four hangers - two on the down pipes, 1 on the center pipe and one on the tail pipe. Sold Each 1946-1951 MkVI (B2AK-401LH) 1955-1959 S1 Continental...

This exhaust gasket sits between the front and rear silencer on all Silver Cloud and Bentley S models.It also sits between the front and rear silencers and the intermediate pipes of a late Silver Wraith twin exhaust system. 1945-1955 Silver Wraith Twin...

This is the gasket between each exhaust manifold and the twin downpipe assembly. Note:  2 gaskets required per car (Sold each) 1956-1959 Silver Cloud, Continental & Bentley S1

This is the 4 bolt rubber exhaust hanger. Each hanger accepts 8 EW1332 & E50062 1946-1955 Mk-6, Dawn, Wraith, R-type (Center & Tail Pipe 3 per Car) 1955-1959 S1 (B2AN-B50HA), S1 Continental (BC1AF-BC31GN) & Cloud I (ALC1-SNH262) 1959-1962...

This is the square mounting plate that sits on each side of the rubber hangers. The plate is what the bolts runs through to attach the hanger to exhaust pipes & silencer. You will need 8 of these plates for the 4 bolt hanger and 4 plates for a 2...

.125UNF x 1.250 long Bolt has many areas found on the car.  Cloud I & S1 - Exhaust Manifold to Downpipe (3 bolts per manifold); Center, Front Silencer & Tail Pipe Silencer (6 bolts) & 12 bolts needed for Complete Exhaust  Cloud...

This is the exhaust gasket that has many applications:   It sits between the manifold and down pipes of all S2 and S3  It sits between the down pipes and front silencer and between the rear silencer and tail pipe of all S2 and early...

This is a .312UNF x 1.125 Long Bolt found in many areas of the car.  Please use diagrams to assure the placement of UA156Z. 1955-1965 Exhaust, Rear Extension, Rear Engine, Brake Pedal Lever, Water Pump 1966-1980 Brake Pedal Lever, Oil Pick Up...