Crankcase

This is the round, 4 hole gasket for the water gallery covers on the right hand side of the crankcase. Note:  There are 3 gaskets per engine (Sold Each) 1956-1959 Silver Cloud I and Bentley S-1

This is the washer for the crankcase / cylinder head. 1960-1965 Silver Cloud II,III and Bentley S2,3 Phantom V models 1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1998...

This seat is on top of the cylinder block that slides over the valve guide exhaust. 1955-1959 Silver Cloud I and Bentley S-1

This is the timing cover gasket. 1956-1959 Silver Cloud I & S1 (6 Cylinders Only)  

This is the coolant rail cover (6 hole) gasket. It is found at the rear crankcase for the rear coolant gallery cover.  Note: Earlier 4.5 liter engines need the 9 hole gasket (RE4911) Supersession:...

This is the 4 hole gasket on the rear of the crankcase for the rear camshaft bearing cover.  It was first fitted to the 4.5 liter Type engine from VIN B209SP appx. Note: Earlier 4.5 liter engines...

This is a 3/8" locktab which has a number of different applications: 1.  On the MkVI & R type engines they are fitted to the main bearing caps - 14 Per engine 2.  On the S1 there are 12 of these...

This is a gasket for the back plate to the pump.  Supersession: RE5772, RE14443, UE2948 1945-1955 Silver Wraith, Mk-6, R-type, Sliver Dawn    1955-1959 C

This Dowel is for the Bearing Cap on the Front Crankcase. 1955-1959 Cloud I & S1

This is the long setscrew for cylinder head to crankcase.29 Per Head (Sold Each) 1956-1959 Silver Cloud I & S-1

This .250UNF x .625in long Bolt fits: Note: Contact us for direct diagram fitting to the areas listed below 1955-1965  Power Steering Cylinder Bracket, A/C Controls & Demister Ducting Blower, A Bank...

This is Aluminum Washer serves multiple uses.  This washer can be found in the Engine, Front & Rear Suspension, Front & Rear Door Trim & Coolant Pump. 1955-1959 Cloud I & S1 -...