Water Pump

This is the gasket to the water pump housing. 1959-1965 Cloud II, III & S2,3 1959-1968 Phantom V

This is the cover for the internal water pump seal. 1960-1965 Silver Cloud II,III & S2,S3 1966-1982 Silver Spirit, Silver Spur, Silver Wraith II, T1, T2 & Mulsanne (VIN 01001-02807) We only recommend buying this seal only if you are familiar...

Rebuilt water pump with a 2 year guarantee & includes gasket. Fits 8 Cylinder  1959-1965 Rolls-Royce Silver Cloud II,III & Bentley S-2,3, Phantom V The water pump is $375. Core charge is refundable if core is returned in rebuild-able...

This is the sponge seal that sits between the water pump volute casing and the front lower crank cover on the front of the engine. Original part # was UE5608 now has been superseded by 07V121230 1959-1998 All Rolls-Royce & Bentley V8 Engines...

This is the timing cover gasket.   1959-1965 Cloud II,III & Bentley S2,3 & Phantom V 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1987 Silver Spirit, Silver Spur, Mulsanne & Turbo R (Up to...

This is the O ring between the rear of the water pump volute casing and the front of the crankcase. There are two of these O rings on each engine.They are suitable for all Silver Cloud II & III and Bentley S2 & S3 models. They are suitable for...

This is a new water pump with a 2 year guarantee & includes gasket. Fits 8 Cylinder models.  1959-1965 Rolls-Royce Silver Cloud II,III & Bentley S-2,3, Phantom V No Core return required

This is the main internal water pump seal.  It is used in all pumps starting with the Silver Cloud II and S2 and last used on UE41094 which was fitted to the Shadow II and early Spirit.   Bentley S2 & S3, T1, T2, Mulsanne (chassis...

.125UNF x 1.250 long Bolt has many areas found on the car.  Cloud I & S1 - Exhaust Manifold to Downpipe (3 bolts per manifold); Center, Front Silencer & Tail Pipe Silencer (6 bolts) & 12 bolts needed for Complete Exhaust  Cloud...

This is the coolant joint elbow or the bypass gasket.  1956-1965 Silver Cloud II,III & S-2,3 & PV’s

This is a Aluminum Washer for the cooling system and oil pick-up.  This washer helps tighten and seal the spaces between the nuts and bolts.   Note: Original part # is XB1092R; superseded to WHT002908 Bentley S1 & Rolls-Royce Silver...

This is a .312UNF x 1.125 Long Bolt found in many areas of the car.  Please use diagrams to assure the placement of UA156Z. 1955-1965 Exhaust, Rear Extension, Rear Engine, Brake Pedal Lever, Water Pump 1966-1980 Brake Pedal Lever, Oil Pick Up...