Rear Wheel Cylinders 1955-1959

This spring has a number of applications:1. It is the spring between the rear brake equalizing rod (UG870 & UG872) and the rear brake back plate/ water excluder on all Silver Cloud and Bentley S Type models.2. This spring is also used on the...

This is the small rubber bush for the gear linkage and brake linkage on all models from 1955-1965  Note:  Please use the diagrams to determine where this bush is located on your car 1956-1965 Silver Cloud I,II,III & Bentley S-1,2,3,...

This is the internal spring for the rear wheel cylinders. 1955-1965 Cloud I,II,III & S-series  1959-1968 Phantom V

This is the seal that sits between the rear brake cover and the back plate. This seal is also known as a water excluder. Note: 1 seal per wheel (Sold Each) 1956-1965 Cloud I,II,III, & S1,2,3

This is a kit of rubber seals and also includes the spreader for one rear wheel cylinder (UG2747) for the S1 and Silver Cloud I Note: Takes 2 per car (Sold Each) 1956-1959 Rolls-Royce Silver Cloud I, & Bentley S-1

This is a new rear wheel cylinder.  Note:  2 required per car (Sold Each) 1956-1959 Rolls-Royce Silver Cloud I Bentley S-1   

This is the rubber boot that covers the end of the rod as it attaches to the rear wheel cylinder. Also called the drawlink boot. There is one boot per side, Sold Each. 1956-1965 Silver Cloud I,II,III, S-series, Continental, Phantom V

This is the rear brake shoe pull off spring (UG1154) and link lever (UG1155) 1955-1965 Silver Cloud I,II,III, S-series, Continental & Phantom V  

This is the Rear Brake Hose there is only 1 required per car.  You usually need to add 1 of UR1200 washer as well.  1955-1965 Rolls-Royce Silver Cloud I,II,III & Bentley S-1,2,3, Phantom V  

Rear Adjusting Screw for the Back-plate / Steady Post rear brake back-plate  1956-1965 Silver Cloud I,II,III, S-series, Continental & Phantom V

This is the rear brake expander for the rear only. 1955-1959 Silver Cloud I & Bentley S-1 

This is the seal that sits between the rear brake adjuster and the rear brake back plate/ water excluder on all Silver Cloud & Bentley S Type models. It is also the front brake adjuster seal for MkVI & R Type.  There is one seal per wheel...

This is the dust cover for the bleeder screw.   These are for bleed screw UR10967 Note: Sold Each All Models  

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow, T-series, and Silver Wraith Type rear calipers and accumulator valve bodies. Early Silver Shadow models with solid front brake discs were originally...