Manifold, Gaskets & Exhaust Fittings

This is the tail pipe extension piece. 1945-1955 (Bentley R-series on and Rolls-Royce SRH series onward) for Twin system

This is the metal distance piece that sits in the bolt hole of the rubber exhaust hanger (RE18216, EB3559 & EB1332) 1946-1954 MkVI & Silver Dawn (Single System) 1955-1962 Cloud I,II & S-1,2 1962 Cloud III (SAZ1-SAZ61) & 1962 S3...

This is the gasket between the down pipes and the front silencers.  Note: 2 Per Car (Sold Each) 1945-1955 Mk-6, R type, Silver Dawn (Models with Twin System Only)

This is the brass nut for the exhaust manifold stud (KB359Z).There is one nut per stud and six studs per manifold (Sold Each) 1946-1955 Rolls-Royce Silver Dawn & Silver Wraith, Bentley MkVI & R Type

This is the exhaust manifold stud that retains the manifold to the block.  The washers are X4404Z and the brass nuts are EW1833 that fit onto these studs Note: 6 studs per manifold (Sold Each) 1946-1955  Silver Dawn & Silver Wraith,...

This is the front exhaust manifold for R-type & Silver Dawn models with twin exhaust. 1945-1955 Silver Dawn & R-type (Twin Exhaust Systems)

This is the square mounting plate that sits on each side of the rubber hangers. The plate is what the bolts runs through to attach the hanger to exhaust pipes & silencer. You will need 8 of these plates for the 4 bolt hanger and 4 plates for a 2...

This is the gasket for the rear silencers and the tail pipes.  Note: 6 per car (Sold Each) 1945-1955 Mk-6, R-type & Silver Dawn (Models with Twin Exhaust)

This is the downtake to manifold gasket.   Note: 2 required per car (Sold Each) 1945-1954 MK-6, R-type, Silver Dawn, Silver Wraith