Front Calipers

This is the R clip required to hold the brake pad CD6722 & CD6396 retaining pin CD4075 in place in the front caliper and all rear calipers 1973 after. 1966-1980 All models 1981-1998 All models

This is a complete set of seals to reseal all four of your front calipers. Only takes 1 per car / per axle.  1966-1980 Vented Shadow, Shadow II, T-series, T-2, Silver Wraith II

This is the complete front caliper assembly RH Leading for the right hand front wheel and the and LH Trailing caliper for the left hand front wheel.  These are only for non-vented models.  Pre 1973 Silver Shadow, T-series 1966-1973 (VIN...

This is the complete front caliper assembly LH Leading for the left hand front wheel and the RH Trailing caliper for the right hand front wheel.  These are only for non-vented models.  Pre 1973 Silver Shadow, T-series 1966-1973...

This is the piston for the front brake caliper.  2 required per front caliper (Sold Each) 1966-1980 (VIN 1001-41686), 1980-1998 (From VIN 1001 onwards)         

This is the caliper gallery seal, which is needed if you plan on breaking apart the actual caliper when rebuilding.  This seal fits in between the two halves.  Early front calipers (for non-vented / solid brake discs) have one gallery seal...

These pins are required when replacing the front brake pads CD6722 (pre 1973 cars). 2 pins required per caliper so 8 required per axle. The R clip for the end of the pins is CD4076. The pins are also fitted into the rear calipers but are supplied as...

This is the dust cover for the bleeder screw.   These are for bleed screw UR10967 Note: Sold Each All Models  

This is the short bleed nipple suitable for all Silver Cloud/ S Type wheel cylinders, all Silver Shadow, T-series, and Silver Wraith Type rear calipers and accumulator valve bodies. Early Silver Shadow models with solid front brake discs were originally...