Head Gasket (Decarb) Kit

This washer has a number of applications, one of which is for the one shot pump.  There are 4 required washers per engine (sold separately)    1946-1955 RR Silver Dawn & Silver Wraith, Bentley MkVI & R...

This is the washer for the banjo bolt on the inlet manifold that retains the petrol drain pipe. This washer is also for the banjo bolt adaptor rocker oil feed. Note: 2 required per car (sold separately)  Bentley S1,2,3, Rolls-Royce Silver Cloud...

These are the original cotton valve stem seals fitted to all Straight 6 engines. 1945-1955 Silver Wraith, Mk-6, R-type, Silver Dawn Models  1956-1959 Silver Cloud I & Bentley S1 (6 Cylinder models only)

This is the circlip for the valve stems. There are 6 per engine (sold separately)  1946-1955 RR Silver Dawn & Silver Wraith, Bentley MkVI & R Type 1956-1959 Bentley S1 & Rolls-Royce Silver Cloud I

This is the rocker cover stud bush grommet for the valve cover, 6 Cylinder.  Note: 3 required per car (Sold Each)  1945-1955 Silver Wraith, Mk-6, R-type, Silver Dawn Models 1956-1959 Silver Cloud I & Bentley S1 (6 Cylinder models only)

This is the standard top hose for all standard bodies cars.  This hose is for models without air! 1956-1959 Silver Cloud I & Bentley S1 * Please be aware that this hose is slightly shorter than the current OE hose but does have the...

This is the square gasket between the rear of the thermostat housing and the front of the cylinder head. Rolls-Royce Silver Cloud I & Bentley S1

This is the Side cover gasket cork for the "aluminum" cover.  Note: 2 Per car (Sold Each) 1946-1955 Rolls-Royce Silver Wraith, Silver Dawn & Bentley Mk-6, R-type 4.25L VIN number B2CF Onwards with Aluminium Covers  

This is the side cover gasket.  Note: 2 Per Car  (Sold Each) 1955-1959 Rolls-Royce Silver Cloud I, & Bentley S-1 & Late Silver Wraith

This is the small sealing washer that sits below the lower fuel filter gauze F86423.From June 2017 these seals are manufactured in Viton to protect them against the effects of increased ethanol within modern petrol. 1946-1955 Mk-6, R-type, Silver Dawn,...

This is the Rocker Cover Gasket. You may need (1) of Part# WHT002908 - washer and (3) part# EB3998 - Grommets when making repairs 1956-1959 Silver Cloud I & Bentley S1 (6 Cylinder models only)

This is the gasket for the hot spot on the inlet manifold. Part number was RE8291. 1955-1959 Silver Cloud I and S-1

This is the fiber washer between the choke hot air pipe union and the choke spring housing. 1955-1965 Silver Cloud I,II,III, S-series & Phantom V 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1981-1987 Silver Spirit,...

This is the gasket between each exhaust manifold and the twin downpipe assembly. Note:  2 gaskets required per car (Sold each) 1956-1959 Silver Cloud, Continental & Bentley S1

This is the exhaust manifold gasket for only Silver Cloud I and S-1 models.   3 gaskets per manifold.  6 total per car (Sold Separately) 1956-1959 Silver Cloud I & Bentley S1 (6 Cylinder models only) 

This is the engine decoke kit includes gaskets, washers, seals & hoses as per the Bentley kit. Fits: 1956-1959 Rolls-Royce Silver Cloud I & Bentley S-1

This is the cylinder head gasket that is made of pressed steel for  models with 4887cc engines. Please note: When fitting, the raised surface should be fitted face up. Smooth surface to the block.  1946-1955 R-Type, Continental, Silver...

This is the gasket between the 2" carburetors and the inlet manifold. Note: 2 Per Car (Sold Each)  1955-1965 Silver Cloud, S-series, Continental & Phantom V with 2" carbs 1966-1977 Corniche, Silver Shadow & Bentley T (UP to...

This is the gasket between the main 2" carburetor body and the air intake. There is one gasket per carburetor. 1955-1959 Silver Cloud I and S-1 with 2" carb

4.25 Litre engine models - From 81HP & All 4.5 litre engine models, S1 & Silver Cloud I with 1.75" carbs These are the two gaskets between the carburetors and the inlet manifold. Note:  Requires 2 of these per car (sold...

This is the Bypass Hose for 6 cylinder models.  1945-1955 Silver Wraith, Mk-6, R-type, Silver Dawn Models 1956-1959 Silver Cloud I and S-1 6 cylinder only

This is a Aluminum Washer for the cooling system and oil pick-up.  This washer helps tighten and seal the spaces between the nuts and bolts.   Note: Original part # is XB1092R; superseded to WHT002908 Bentley S1 & Rolls-Royce Silver...

This is the gasket between the air intake and the automatic choke body butterfly housing.  Note: The original part number was RE13241.  This has been superseded with RH13025. 1945-1955 R-type (ONLY) 1956-1965 Silver Cloud I & S1...