Manifold, Gaskets & Exhaust Fittings

This is the metal distance piece that sits in the bolt hole of the rubber exhaust hanger (RE18216, EB3559 & EB1332) 1946-1954 MkVI & Silver Dawn (Single System) 1955-1962 Cloud I,II & S-1,2 1962 Cloud III (SAZ1-SAZ61) & 1962 S3...

This is the rubber hanger that attached the exhaust to the chassis. On a MkVI single system there are four hangers - two on the down pipes, 1 on the center pipe and one on the tail pipe. Sold Each 1946-1951 MkVI (B2AK-401LH) 1955-1959 S1 Continental...

This is the brass nut for the exhaust manifold stud (KB359Z).There is one nut per stud and six studs per manifold (Sold Each) 1946-1955 Rolls-Royce Silver Dawn & Silver Wraith, Bentley MkVI & R Type

This is the exhaust manifold stud that retains the manifold to the block.  The washers are X4404Z and the brass nuts are EW1833 that fit onto these studs Note: 6 studs per manifold (Sold Each) 1946-1955  Silver Dawn & Silver Wraith,...

This is the exhaust manifold gasket. Note: 6 required per car / 3 per manifold (Sold Each) 1945-1954 MK-6, R-type, Silver Dawn, Silver Wraith

This is an exhaust hanger ASP washer Note: 2 per car (Sold Each) 1945-1955 Silver Wraith, Mk-6, R-type, Silver Dawn Models  

This is the square mounting plate that sits on each side of the rubber hangers. The plate is what the bolts runs through to attach the hanger to exhaust pipes & silencer. You will need 8 of these plates for the 4 bolt hanger and 4 plates for a 2...

This is the Exhaust gasket on the end of the swan join pipe. Note: Only 1 per pipe per car 1945-1955 Silver Wraith, Mk-6, R-type, Sliver Dawn

This gasket is fitted on each end of the front & rear silencers. 1945-1955 Silver Dawn SBA-SPG & MkVI A-LH series Single Exhaust System

This is the downtake to manifold gasket.   Note: 2 required per car (Sold Each) 1945-1954 MK-6, R-type, Silver Dawn, Silver Wraith  

Downtake pipe clip 1945-1955 R Type & Silver Dawn (Models with Twin System)