My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
In 1981, Bentley brought out a modification kit to address reports of coming fans coming loose on SY models from 1977. Not unavailable new, this is a good used fan drive modification kit. Originally the fan was fixed with a flange and bolt, which could loosen over time and cause the engine to overheat when the fan detached. The modification introduced a two piece interlocking design that was a lot more secure.
The kit consists of:
-RH9650U Retaining Bush
-RH9649U Extension Piece
-UA206ZU Bolton Piece
-UA206Z Bolt
This photo is for reference only and the part you receive might be slightly different. Please check with our sales staff if you have any question
1977-1980 SY / Shadow / T / Shadow II/ T-2/ Silver Wraith models
1980-1981 NON-TURBO
This is a good used by pass elbow that is on top of the water pump volute casing for the S shaped tube UE37117. You will also need the gasket RH12756 that seals the elbow to the casing...
This is a good USED 'S' shaped by pass tube. You will need part# UE9333 O'rings on each end This photo is for reference only and the part you receive might be slightly different. Please check with...
This is the plastic cooling fan, first fitted to the Silver Shadow II and T2 from VIN 30001. It was subsequently fitted to all models up to 1987 (VIN 20000) except the later carburetor Turbo models...
This is the main internal water pump seal. It is used in all pumps starting with the Silver Cloud II and S2 and last used on UE41094 which was fitted to the Shadow II and early Spirit...
